In this article, I'll describe how to set up a web-based archive for a mailing list. This article picks up from where I left off in my previous article, "A Quick and Easy Way to Set Up a Mailing List", also in this issue of Linux Gazette. If you haven't already done so, I highly recommend that you read that article first before reading this one. A lot of the context and content in here are derived from the methods described in that article.
First, I'll briefly describe the mailing list setup that we'll be using in this article. If you have read the previous article, this setup will be familiar to you.
Let's say that we have a mailing list called firstname.lastname@example.org, running on a Linux system called mybox.example.com. The e-mail addresses subscribed to this list are email@example.com, firstname.lastname@example.org, and email@example.com. We set this up using our Mail Transfer Agent's aliases file (usually /etc/mail/aliases or /etc/aliases, depending on your distribution). Our mailing list has been set up like this in the aliases file:
theproject: linus, firstname.lastname@example.org, email@example.com
So when e-mails are sent to firstname.lastname@example.org, those e-mails will be automatically propagated to email@example.com, firstname.lastname@example.org, and email@example.com.
Before we get started with the instructions for setting up the web-based archive, I'll first explain what we plan to achieve. What we want to do is allow your workgroup members to access a website that will host your mailing list archive. For example, you can host your mailing list archive on http://mybox.example.com/theproject/ and make it accessible to all your workgroup members.
Having a web-based archive makes it easier and more convenient to check out what has been discussed. Also, it can act as a central location to store documents and other attachments. You can also use it as a backup in the unfortunate event that you lose your e-mails (which I hope will never happen!).
If you want to set up a web-based archive for your mailing list, you'll need:
You'll first need to check if the webserver is running. Again, you can use the netstat command to do this:
lteo@mybox:~$ netstat -a | grep www tcp 0 0 *:www *:* LISTEN
If the system responds with that line, it is likely that your webserver is already running. If it is not, you can start it by issuing the command "/etc/init.d/apache start" on Debian, the same or "/etc/rc.d/init.d/httpd start" on Red Hat, etc. In Slackware, issue the command "/etc/rc.d/rc.httpd start".
After you've downloaded hypermail, proceed to install it using the instructions in its README file. The installation steps should be pretty standard. If you're in a hurry, the following commands should work for you (they're meant for hypermail 2.1.2; substitute the version number for the hypermail version you downloaded):
root@mybox:~# tar zxf hypermail-2.1.2.tgz root@mybox:~# cd hypermail-2.1.2 root@mybox:~/hypermail-2.1.2# ./configure root@mybox:~/hypermail-2.1.2# make root@mybox:~/hypermail-2.1.2# make install
The next thing you need to do is to set up a dummy user account on your system. We will register this account on the mailing list, and use it exclusively for collecting all mails sent to the mailing list. We will then generate the mailing list archive using this dummy user account's mailbox.
Let's call our dummy account "projarc". You can create it in the same way you create a normal user account on your Linux distribution. I personally use the adduser command on my Debian GNU/Linux system:
root@mybox:~# adduser Enter a username to add: projarc Adding user projarc... Adding new group projarc (1004). Adding new user projarc (1004) with group projarc. Creating home directory /home/projarc. Copying files from /etc/skel Enter new UNIX password: <password> Retype new UNIX password: <password> passwd: password updated successfully Changing the user information for projarc Enter the new value, or press return for the default Full Name : Dummy user Room Number : Work Phone : Home Phone : Other : Is the information correct? [y/n] y
You will need to add this user to your the aliases file (/etc/mail/aliases or /etc/aliases) to get it registered as a member of the mailing list. To do this, just edit the file and add the username to the list. The section that describes your mailing list members in the aliases file should look like this:
# The Project mailing list theproject: projarc, linus, firstname.lastname@example.org, email@example.com
Remember to run that command to inform your MTA about the changes after you've done this.
We will be using projarc's public webspace to host our mailing list archive. To do that, create a public_html directory in the projarc's home directory:
lteo@mybox:~$ su - projarc Password: <password> projarc@mybox:~$ mkdir public_html
Note that the user's public webspace may be represented by another name instead of public_html. It depends on your webserver setup. You also need to ensure that your webserver allows users to host public webspaces in this manner. I'll explain how to enable this in the next section.
The next step is to set up Apache so that it allows users on the machine to have their own public web directories. The Apache configuration file you need to edit is /etc/apache/httpd.conf. Again, this may differ depending on your distribution. If it's not there, issue the command "locate httpd.conf" or "find / -name httpd.conf" to find it. Once you've found it, open it up with your text editor and make sure that the following lines are uncommented (meaning they don't have the # symbol in front of them):
<IfModule mod_userdir.c> UserDir public_html </IfModule>
It is likely that your UserDir value is not public_html, and may be something else like www. You can use whatever directory name you wish to represent the user's webspace.
Now if you want your workgroup members to access your archive using an address such as http://mybox.example.com/theproject/ you'll need to set up a symbolic link from your Apache's root webspace to point to projarc's webspace. To find out what your Apache's root webspace is, check out the DocumentRoot value in /etc/apache/httpd.conf:
root@mybox:~# grep ^DocumentRoot /etc/apache/httpd.conf DocumentRoot /var/www
In the above example, Apache's root webspace is at /var/www. To create a symbolic link to point to projarc's public webspace, issue the following commands:
root@mybox:~# cd /var/www root@mybox:/var/www# ln -s /home/projarc/public_html theproject
When a user receives e-mails, the e-mails will be stored in a file called /var/mail/username. So in the case of projarc, the file will be called /var/mail/projarc (Note: in some distributions, this would be /var/spool/mail/projarc).
We can use hypermail to read that mail file to generate the web-based archive. However, when the projarc account is newly created, that file won't exist yet. So you'll need to send an e-mail to firstname.lastname@example.org first just to get that file created.
After sending out that test mail, run the following command as projarc:
projarc@mybox:~$ hypermail -m /var/mail/projarc -l "The Project" -d /home/projarc/public_html
Now open up http://mybox.example.com/theproject/ in your web browser and you should see your mailing list archive there. It should look something like this:
Most recent messages
It would be more convenient to use a hypermail configuration file to run hypermail instead of typing in all those command-line parameters all the time. To do this, create a file called /home/projarc/projarc-hmrc and fill it with the following lines:
mbox = /var/mail/projarc label = The Project dir = /home/projarc/public_html
You can now generate the mailing archive by running the following command:
projarc@mybox:~$ hypermail -c /home/projarc/projarc-hmrc
Now, we would definitely want our mailing list archive to be automatically updated whenever somebody sends mail to the mailing list. We will use cron to do this. It won't be updated in real time, but we can set cron to run hypermail every 5 minutes, which should be frequent enough for a simple mailing list. Of course, you can always use a shorter interval such as 2 minutes; it's entirely up to you. Just remember that the shorter the interval, the more load the machine will have to handle. That may not be good if you have mail files that are really big with a lot of attachments, and you're hosting several mailing lists on a slow machine.
So, let's set up cron. Issue the following command to edit your cron table:
projarc@mybox:~$ crontab -e
You should now be in an editor with your crontab file open. If you want hypermail to run every 5 minutes, enter the following lines:
# Update The Project mailing list archive every 5 minutes */5 * * * * /usr/bin/hypermail -c /home/projarc/projarc-hmrc
When you're done, just save and exit. To test it, just wait for five minutes and refresh the http://mybox.example.com/theproject/ web page on your browser. You should see the updated "Archived on" timestamp after hypermail runs.
Here's a summary of the steps we used to set up our web-based mailing list archive:
I hope that you'll find the web-based mailing list archive to be as useful as I have. If you have any comments or suggestions, please feel free to drop me some e-mail.