In this document, we'll explain how to do this using PPP (Point
to Point Protocol), a popular protocol nearly always used over the
Internet. It allows your modem to
speak to the outside
world. This is what applications like Trumpet Winsock in Windows
3.x did, and many other programs that you've probably have never
In Linux, we use a thing called chat to do the dialing up to the ISP and then use a utility called pppd to 'use' the connection. In a sense, chat is your dialer, and pppd is your protocol. We'll describe how to setup both below.
Probably the easiest way to go about things is to make a shell
script in root's home directory called
involke the script whenever you wish to make your connection. We'll
discuss this method.
Open up your favourite editor as root on /ppp-connect. You'll then have to decide on your parameters.
pppd connect 'chat -v "" "your_init_string" "" ATDTisp_number CONNECT "" ogin: your_username word: your_passwd' /dev/tty(0/1/2) speed modem
pppd involkes /usr/sbin/pppd on my system, then loads up chat to do the dialing. Chat sends your_init_string to the modem, then dials isp_number. It then waits for CONNECT, then waits for ogin: (l removed as the first character is sometimes lost), sends your_passwd, chat then terminates and hands the show over to pppd.
The last of the command specifies your modem port (mine's /dev/ttyS1). In most cases it will be ttyS1 (COM2: in DOS), ttyS0 (COM1: in DOS), or if your using Slackware, cua1 or cua0. The speed is the speed of the modem. I use 115200 for my modem (a 33.6k). If you have got a fairly recent computer (one with a 16550 UART), then I wouldn't go any lower than 57600. Otherwise, for 14.4k 38400. Modem just tells pppd that it's a serial/modem based connection. Remove the -v option if you don't want verbose logging to your logfiles.
The scenario below is one of a person who dials up an ISP that automatically starts PPP for them, ie; they don't have a shell that actually starts. This is his command in his /ppp-connect:
pppd connect 'chat "" "ATZ" "" ATDT555-1800 CONNECT "" ogin: johnny word: blackjak' /dev/ttyS1 115200 modem
But for some people, they're ISP starts up a shell and doesn't automatically start PPP this may be a problem. Luckily, chat can deal with that too. You just add another command to your chat script. For example, below this johnny character is using an ISP that just dumps him to a shell, requiring him to type ppp to get a ppp connection. His shell prompt ends with a $. pppd connect 'chat "" "ATZ" "" ATDT555-1800 CONNECT "" ogin: johnny word: blackjak $ ppp' /dev/ttyS1 115200 modem
If it's more than one word, ensure you quote it. I hope you can see the drift of this, and are able to create your own script up to suit your connection. Simply modify either the first johnny or the second johnny script to suit your taste, port, server, etc and save the file.
Now you've made your file, ensure that only root can execute, read or write to it. This is extreemly important. Also make sure nobody can read your logfiles, if you decide to leave the -v option in, as your password is seen in cleartext in the logs (I don't see much need for -v, if you don't know what I'm talking about, leave -v out).
For most people using the options above, a changing IP address won't bother them. These people include basic, easy going users, that just have dialup accounts, and aren't very technically minded. For those people, skim read this section, I'll come to important things you need to do to setup your system properly. Newbies, skip the sections dealing with permanent IP, Domain Names, Subnets, and just read the last bit of this section.
Getting a permanent IP address might be free for your ISP, so if in doubt ask them. Personally, I'd pay for a permanent IP address. It lets you send e-mail to and from using a unique IP or domain, etc. If you want to get yourself a permanent IP, write an e-mail to email@example.com, and ask him nicely if he can arrange a permanent IP for you.
When you get your permanent IP address, grep through your /etc directory to find where your old IP addresses are. I had to change files in my sendmail directory and /etc/hosts. There are some other key files that you will only discover with grepping. Open up /etc/hosts, and add your new IP address in the standard format. Reboot your computer, and you should be ready to go.
You'll now need to change your chat script to reflect your new settings. If you are forced into PPP as soon as you start your connection, you'll need to tell your System Administrator of your ISP to ensure their PPP system recognises that you have a permanent IP address and allocates you that instead of a changing one. If you get dumped at a shell prompt, and you need to type ppp or something to start the connection, instead of typing that, change your /ppp-connect script to send this instead of just ppp or whatever when it sees $ or whatever your shell prompt is.
Substitute your IP address for the IP address your ISP gave to you. Be sure you encapsulate the thing in " " marks when you put it into your chat script. If this doesn't work, consult your ISP where your PPP daemon is located, and ask him for the command to give. You could just try leaving it as is and seeing if the server will recognise you and give you your rightful address.
The next thing probably to do is to get yourself a domain name. I know that in Australia, .asn.au and .org.au are free. In the United States, you can get a .us domain for free, but they tend to be long. If your in Australia, you must go to http://www.aunic.net/ to register your domains. In the United States, it is http://www.internic.net/ .
To register domains you need to be able to provide DNS services, and gorey stuff like that. If your ISP can't provide these, throw out an official .asn.au or whatever domain out the window, and get a Monolith Internet Domain.
Monolith offer free domains to anybody and anyone all around the world. Everything is done without human interaction, via a web forms interface with your browser. Your domain comes in the form of Your_Choice.ml.org. Monolith will then host the DNS locally for you. If you want to send and receive mail from that domain, ask your ISP to become a mail exchanger for you.
Go to http://www.ml.org/ and fill out an application, enter the NIC with your username and password, and make a FREED domain. You'll need to enter your IP address, so have that ready. Your domain will be in the DNS in a couple of days.
Okay now, we'll move onto the newbies section, or for those people who can't get a permanent IP address or a domain name. All you have to do is edit /etc/hosts as root, call your site something that won't clash, give it a 10.10.10 or something for an IP address and reboot your computer.
There you go, you've just setup your computer with pppd and chat in just ten minutes. Now let's move onto the next section, which deals with Electronic Mail.