There are a lot of different mice out there, and I cannot honestly say that you should go out and buy one rather than the other. What I can do is give a list of what I think these mice do, based on experience and heresay. Even with this information you should be a little cautious - we had two identical mice in our office on two computers, some things worked on one and not t'other! Any additions to this list would be welcome.
Mouse Systems optical mouse, serial version
Works well (as you might expect from the name!) without ClearDTR or ClearRTS in the config.
WiN mouse, as sold by Office World for eight quid.
Standard dual-mode Microsoft/MouseSystems.
Agiler Mouse 2900
Standard dual-mode Microsoft/MouseSystems. SYSGRATION SYS2005 chip is solderable.
Works ok, needs ClearDTR & Clear RTS in config.
Index sell a mouse for 10 quid,
Doesn't work in 3 button mode, but does have nice instructions :-)
Usual dual-protocol mouse, needs `ClearDTR' set in config, NOT `ClearRTS'
DynaPoint 3 button serial mouse.
Usual dual-protocol mouse, needs `ClearDTR' AND `ClearRTS' in Xconfig.
Genius Easymouse 3 button mouse
Works fine with Mouseman protocol without the ChordMiddle parameter set. From Roderick Johnstone ( firstname.lastname@example.org)
Truemouse, made in Taiwan
Works OK, needs `ClearDTR' in config. (From Tim MacEachern)
Champ brand mouse
Needs to have switch in PC mode, which enables MouseSystems protocol also. (From email@example.com)
Usual dual-protocol mouse.
Venus brand ($7)
Has a jumper inside to switch between 2 and 3 button mode. (From firstname.lastname@example.org )
Switched mouse, works OK as MouseSystems in 3-button position. (From email@example.com .)
Switch for `MS AM' / `PC AT' modes, MS mode works fine with the
gpm -R method. (From
Switch for `PC/MS' modes, works fine. (From http://ptsg.eecs.berkeley.edu/~venkates).
qMouse (3-button), FCC ID E6qmouse X31.
Sells in the USA for about $10. Works with `gpm -t msc -r 20'. No jumpers or switches for MouseSystems 3-button mode. Unreliable in X. Does not respond to
echo "*n" > /dev/mouse.
Mitsumi Mouse (2-button), FCC ID EW4ECM-S3101.
Sells in the USA for about $12. Reliable in X and under gpm, smooth double-button. (These two from firstname.lastname@example.org)
PC Accessories mouse that i got from CompUSA for under $10.
Has PC/MS switch on bottom. Works OK. (From email@example.com)
First Mouse - seriously cheap at 7.79 pounds at Tempo.
Dual Microsoft/MouseSystems, mode set by button depress at power-up. No switches, no links. Four wire connection, echo '*n' doesn't work. `gpm -R' works a treat. (From firstname.lastname@example.org)
Trust 3-button mouse.
Dual-mode with switch, works OK as MouseSystems in `PC' mode. gpm doesn't like the Microsoft mode.
Works perfectly when kept in ms mode and used with the gpm -R command. From Stephen M. Weiss ( email@example.com)
KeyMouse 3-button mouse.
Works OK with ClearDTR and ClearRTS in Xconfig; `-o dtr' needed with gpm. (From EZ4PHIL@aol.com)
Qtronix keyboard `Scorpio 60'
All three buttons work in MouseSystems protocol. (From firstname.lastname@example.org)
Tecra 720 laptop
The glidepoint is on /dev/cua0; the stick is on /dev/psaux. (From email@example.com)
Works fine, need to hold down left button whenever switching to the X virtual console. (From Joel Crisp)
Yakumo No.1900 mouse
gpm -R -t ms exporting to X.
Genius `Easy Trak' Trackball
Is not Microsoft compatible, use
in the Xconfig and it will work fine. (From
Highscreen Mouse Pro
`Works fine' says firstname.lastname@example.org.
Logitech CA series
Works in X using MMseries protocol, at 2400 Baud, 150 SampleRate. (Should also apply to Logitech CC, CE, C7 & C9 mice). (From email@example.com.)
Works OK, needs
DTR line under both X and gpm.
Normal Microsoft/Mousesystems behaviour, can be soldered for a permenant fix. (From firstname.lastname@example.org.)
Boeder M-7 ``Bit Star'' (and other M series apart from M13)
Switches to Mousesystems protocol by holding any button down at power-on. (From mailto:email@example.com.)
Mouse Systems ``Scroll'' Mouse (four buttons and a roller/button)
Has a 2/3 switch - in mode 3 functions as a three button MouseSystems mouse, ignoring extra button & wheel. Doesn't need
Radio Shack 3-button Serial Mouse
Model 26-8432, available in Tandy for about 20 quid. Works as Mousesystems with ClearDTR. (From Sherilyn@sidaway.demon.co.uk.)
Dexxa serial mouse
Works fine using Microsoft protocol in Xconfig, no ChordMiddle or anything needed. (From mailto:firstname.lastname@example.org.)
Belkin 3 button mouse
As purchased from Sears (\$10), needs
-o rts under gpm
ClearRTS under X) when in PC mode.